CS 2200 Project 5 Caches solution

$19.99

Original Work ?
Category: You will Instantly receive a download link for .ZIP solution file upon Payment

Description

5/5 - (2 votes)

Caches are complex memory and sometimes difficult to understand. One way to understand them is to
build them. However, due to time constraints and lack of hardware expertise, we will instead write a
cache simulator. In this project, you will be implementing a cache simulator and then running some design
experiments to find an optimal cache for the given workloads. We have provided you the following files,
written in your favorite programming language C:
• cachesim driver.c – The file that drives your cache.
• cachesim.h – Header file containing important declarations.
• cachesim.c – The cache simulator, missing some vital portions of code that you will be filling in.
• Makefile – To compile your code. Modify at your own risk.
• traces – The workloads inside the traces directory
• solution.txt – The solution generated by the TA’s. You must debug your simulator untill all the test
cases match.
• run script.sh – A script to run all the test cases.
You will be filling in the subroutines in the cachesim.c file, and then validating your output against the
sample output the TA’s have generated.
This is a simple assignment that will check your understanding of how caches work. However, keep in
mind that your choice of data structure used will greatly impact the difficulty of coding the simulator If
you are struggling to write code, then step back and review the concepts.
RULES
Please make sure to follow the following rules:
• All code must be your own work. There should be no sharing of code. Please follow the Georgia
Tech Honor Code.
• You may not use any standard libraries, or code that you have written in the past for completing this
assignment. All work must be yours and done anew.
• You may discuss implementation details with your peers, but they cannot debug your code or provide
you with any code.
• DO NOT MODIFY the driver file. This may cause our auto grader to break, and you may get no
credit for your hard work.
CACHE – CORE CAPABILITIES
Here are the specifications that your simulator must meet:
1. The simulator must model a cache with 2
C bytes of data storage, having 2
B byte blocks with 2
S blocks
per set. Note: S = 0 implies a direct map cache, and S = C – B is a fully associative cache.
2. The cache implements a write back, write allocate strategy. This means there has to be a dirty bit for
each block in the cache.
3. There is a valid bit for each block. This should be set to 0 at the start of the simulation.
1
PROJECT 5 – CACHE CS 2200 – SYSTEMS AND NETWORKS Summer 2015
4. The cache implements an LRU replacement policy. This means that the least recently used block is
chosen for replacement.
5. All memory accesses are 64-bit (i.e Address length is 64 bits).
6. The cache is byte addressable.
7. The following formula is used for Average Access Time (aka EMAT)
• AAT = Hit Time (HT) + Miss Rate(MR) * Miss Penalty(MP)
• Given that HT = 2ns, and MP = 100ns (Set in cachesim.h)
IMPLEMENTATION
Your task is to fill out the following functions:
void cache init(uint64 t c, uint64 t s, uint64 t b)
This is the subroutine that initializes the cache. You may add and initialize as many global or heap (malloc’ed)
variables here.
void cache access(char type, uint64 t address, cache stats t *stats)
This is the subroutine that will simulate cache accesses, one access at a time. The ‘type‘ is going to be
either READ or WRITE kind. The ‘address‘ field is the memory address that is being accessed. ‘stats‘
should be used for updating the cache statistics.
void cache cleanup(cache stats t *stats)
Use this function to cleanup any memory and for calculating final statistics. Update changes in the ‘stats‘
parameter. Hint – All malloc’ed memory must be freed here.
STATISTICS – AKA THE OUTPUT
The output from your final cache is the statistics that your cache calculates for each workload. Here is the
list of fields inside the cache stats t struct and their meaning:
1. accesses – The total number of memory accesses your cache gets
2. reads – The number of accesses that were reads (type == READ)
3. read misses – The total number of misses that were cache misses
4. writes – The number of accesses that were writes (type == WRITE)
5. write misses – The total number of writes that were cache misses
6. misses – The total number of misses (Reads + Writes)
7. write backs – The total number of times data was written back to memory
8. access time – The access time of the cache (It is already set to 2ns in the driver)
9. miss penalty – The miss penalty for a cache miss (It is already set to 100ns in the driver)
10. miss rate – The miss rate for the cache
11. avg access time – The average access time for your cache, aka EMAT
The driver displays the output for these parameters onto the terminal screen. You only need to fill in the
‘stats‘ structure passed in the cache access() and cache cleanup() functions.
2
PROJECT 5 – CACHE CS 2200 – SYSTEMS AND NETWORKS Summer 2015
VALIDATION REQUIREMENT
Four sample simulation outputs will be provided on T-square. You must run your simulator and debug till
your output perfectly matches all the statistics given in the sample output.
DESIGN EXPERIMENT
After validating your cache against the output given by the TA’s, you need to design a cache for each trace
in the trace directory under the following constraints:
1. Maximum cache size is 32 Kilo Bytes including the cache tag store, valid bits, dirty bits and the actual
data. You can exclude the bits used for LRU replacement.
2. The cache should have the lowest possible AAT.
You can vary any parameter, cache size, associativity and block size (C, B, S). However, keep in mind that
the maximum block size is 64 bytes, that is B is maximum 6.
Write a 1 – 2 page report giving the specifications of the best cache you came up with for each of the 4 traces
we have provided you.
HOW TO RUN YOUR CODE
We have provided you a ‘Makefile‘ that you can use to compile your code. Modify the Makefile at your
own risk
Use these commands to run the cache simulator driver:
$: make
$: ./cachesim -c • If you don’t provide the cache size, block size and set associativity, the default value will be used.
• Note: To store the output of your simulator in a text file, pipe the output of the simulator to a text file
by adding ‘‘ To run a script that will run all the tests, do the following:
$: bash run script
Finally: To pipe the output for all the test cases to a text file, you could run
$: bash run script <Filename
To verify that you are matching the TA generated output, you can use the ‘diff‘ command. Here is how
you can do it:
$: diff WHAT TO SUBMIT
To generate a submittable version of your project, type in ‘make submit‘ into the terminal. You need to
submit the following:
• The tarball you just generated
• The report summarizing the best cache for each trace
3
PROJECT 5 – CACHE CS 2200 – SYSTEMS AND NETWORKS Summer 2015
HINTS
• Before you start implementing the project, consider using structs for each block and think of what all
you might need to store in the struct.
• For LRU replacement, we suggest using a global clock to assign times to each cache access. This will
let you find the oldest block in a set when you need to evict a block.
• We suggest writing helper methods to break the address into tag, index and offset.
• Visualize how a cache looks in the book, and use that to organize the structure in your implementation.
Arrange the data structure you are using in this manner.
Don’t forget to sign up for a demo! We will announce when these are
available. Failure to demo will result in a score of 0!