Description
For this project, you will be counting words in text files and keeping track of the frequency (number of
times) each word was found in a text file. To do this, you will be using populating a heap and a binary
search tree with text_item objects (shown below). A text_item has two fields: word to represent each
word, and freq to represent how many times each word has been seen.
A text_item is defined as follows:
struct text_item {
std::string word; //the word
int freq; //the frequency we have seen the word
};
In Parts 1 and 2, you will be implementing a max-heap (prioritized by word frequency), and a binary
search tree (sorted alphabetically) to organize text_item elements. In Part 3, you will use the code
implemented in Parts 1 and 2 to explore the word frequencies of text files.
Starter files and usage:
Please download the .zip file containing all of the starter files for this project. The file can be found at
https://www.ugrad.cs.ubc.ca/~cs221/current/assigns/word_frequency/word_frequency-student_files.zip
The compile from the command-line (assuming in the directory containing the files): make
The command to run and test your implementation: ./main
Part 1: Complete the functions in max_heap.cpp
For Part 1, you will need to complete the functions insert, delete_max, swap_up and swap_down in
max_heap.cpp so items can be properly added and removed from the heap. For reference, use the
header file max_heap.hpp, lecture slides from Unit #2, and Section 8.5 from the Koffman textbook.
It is important to remember the Heap-Order Property discussed during lectures (Slide #17 from Unit #2:
Priority Queues). The examples covered during lecture demonstrated how to insert and remove from a
min-heap, whereas in this assignment you should implement a max-heap, with the following HeapOrder Property: parent’s key >= children’s key. The key for this assignment will be the value of the freq
field of a text_item. Remember: this property must hold for every element contained in the heap.
For Part 1, the only files you need to modify are the functions in max_heap.cpp and main.cpp. Within
these two files, there are comments that specify where you need to add functionality or tests.
What you need to do (Part 1A):
1) Complete the code in the insert and swap_up functions in max_heap.cpp.
2) Add tests in the heap_insert_tests function in main.cpp to verify the insert and swap_up
functions are correct.
What you need to do (Part 1b):
1) Complete the code in the delete_max and swap_down functions in max_heap.cpp.
2) Add tests in the heap_delete_tests function in main.cpp to verify the delete_max and
swap_down functions are correct.
Note: If you would like to change the number of items added to the heap for testing in Part 1, look at
the heap_tester function in main.cpp.
Part 2: Complete a function in string_bst.cpp
For Part 2, you will need to complete the function word_frequency in string_bst.cpp to return the
freq value of a text_item by searching through your BST (which is ordered alphabetically by the value
of the word field of each text_item).
It is important to remember that Binary Search Trees have the following property: all keys in left subtree
of a node are smaller than the node’s key, and all keys in right subtree of a node are larger than the
node’s key. The key for this assignment will be the value of the word field of a text_item. Words are
ordered alphabetically; when comparing two words, the word that would come first in the dictionary
would have a smaller key than a word that comes later in the dictionary. Remember: this property must
hold for every node in the tree.
For Part 2, the only files you need to modify are the functions in string_bst.cpp and main.cpp. Within
these two files, there are comments that specify where you need to add functionality or tests.
What you need to do:
1) Complete the code in the word_frequency function in string_bst.cpp.
2) Add tests in the tree_tests function in main.cpp to verify the function is correct.
Note: The tree is generated from an input text file. To change the input file, change the first parameter
in the load_bst function call in the main function of main.cpp (at the bottom). Two sample text files
are provided (sample1.txt and sample2.txt). The first file, sample1.txt is a rather small file, whereas
sample2.txt includes the full text from Les Miserables. Feel free to create your own text files to test with.
Part 3: Complete functions in main.cpp
For Part 3, you will need to complete functions overall_most_freq, at_least_length, and
starts_with in main.cpp. For Part 3, the only files you need to modify are the functions main.cpp.
Within this file, there are comments that specify where you need to add functionality.
What you need to do:
1) Complete the code in the overall_most_freq to print out the 5 most common words found
in a text file (which have been moved into a heap for you, and should be ordered by freq if you
have completed Part 1). If the heap contains less than 5 elements, all of the elements should be
printed out in order. (For example, if the heap only contains 3 elements, all three should be
printed out in order based on the value of freq).
2) Complete the code in the at_least_length to print out the 5 most common words of a
specific length. For example, if the value passed into the function for num_letters is 12, the
function should print out the 5 most common words that have 12 or more characters. Similar to
in 1), if the heap does not contains 5 items with the specific number of letters, then all of words
with the minimum number of specified letters should be printed out in order of frequency.
3) Complete the code in the starts_with to print out the 5 most common words of that start
with a specific letter. For example, if the value passed into the function for starts_with_letter is
‘d’, the function should print out the 5 most common words that begin with the letter ‘d’.
Similar to in 1), if the heap contains fewer than 5 words that begin with the specified letter, then
all words that do begin with that letter should be printed out in order of frequecy.
4) In Part 2, you wrote a function for a BST populated from a text file. In main.cpp, the function
text_analysis_tester copies a tree to a heap and calls the 3 test functions you must
complete for 1), 2), and 3) above. You should change the second parameter in the function calls
to both functions at_least_length and starts_with to ensure your solution works with
different parameters. (For example, your solution should be able to find the most frequent
words with a different minimum string length and words that start with a different first letter,
based on the parameters passed into the functions).
Sample output for Part 3:
(from sample2.txt)
*** Top 5 most frequent words: ***
text_item{“the”,40506}
text_item{“of”,19652}
text_item{“and”,14786}
text_item{“a”,14315}
text_item{“to”,13761}
*** Top 5 most frequent words with at least 6 letters ***
text_item{“marius”,1347}
text_item{“valjean”,1098}
text_item{“himself”,1063}
text_item{“cosette”,1000}
text_item{“little”,971}
*** Top 5 most frequent words that begin with c ***
text_item{“cosette”,1000}
text_item{“could”,675}
text_item{“come”,548}
text_item{“child”,453}
text_item{“can”,432}
What to submit:
– Please submit all of the .hpp and .cpp files provided to you for the project.
– Also include a README.txt file that gives any special instructions or comments to the marker:
– Your name or, if you have a programming partner, both your names
– Important: Only one partner should submit the files, but be sure to list both students’ CS
userids, names, and student numbers.
Partners: Please make sure you communicate with each other as to who is
turning in the files—and when. You can always resubmit your files before the
due time. After the deadline, you’ll only get one submission attempt.
Acknowledgment of any assistance you received from anyone but your team members,
the 221 staff, or the 221 textbooks, but please cite code quoted or adapted directly
from the texts (per the course’s Collaboration policy)
– A file output.txt consisting of output from your testing of Part 1 through Part 3.
To submit, please read through the ‘How to Use the Online “handin” Program’ section below.
What else you need to know:
– Besides the functions mentioned above, you should not need to add or modify the code in any
of the functions in the string_bst or max_heap files, and can assume the functions work as
intended. If you find any issues with the implementation of these functions, please let a TA or
instructor know.
– Do not change the function signatures of any of the functions you have been asked to modify
(insert, delete_max, swap_up and swap_down in max_heap.cpp), (word_frequency in
string_bst.cpp), and (overall_most_freq, at_least_length, and starts_with in
main.cpp). If you think you need to change the signatures based on your implementation, please
contact a TA or instructor for assistance.
– You should not need to make any changes to the header (.hpp) files, util.cpp, or text_item.cpp.
– You may create helper functions to help to complete the tasks assigned in Parts 1 through 3, but
the helper functions should be called from within the functions you were assigned to complete.
How to Use the Online “handin” Program
Please pay attention to the messages displayed on your screen during handin, to verify success. All
submissions—on-time or not—are timestamped.
1. Create a directory called ~/cs221/proj2 (i.e., create directory cs221 in your home directory, and
then create a subdirectory within cs221 called proj2).
2. To prepare to submit, first move or copy all of the files that you wish to hand in, to the proj2
directory that you created in Step 1.
3. Before the due deadline, hand in your directory electronically, as follows:
handin cs221 proj2
Note that you will receive a set of confirmation messages. If you don’t get an acknowledgement, then
you probably did something wrong. Please re-read the instructions and try again.
4. You can overwrite an earlier submission—unless it is now past the deadline—by including the -o flag,
and re-submitting, as follows:
handin -o cs221 proj2
You can hand in your files electronically as many times as you want. The latest timestamp will
determine your official handin time.
5. Additional instructions about handin, if you need them, are listed in the man pages (i.e., by typing:
man handin). At any time, you can see what files you have already handed in (and their sizes) by
typing the command:
handin -c cs221 proj2
Note: If your files have zero bytes, then something went wrong and you should run the original handin
command (without the -c) again.
6. To see the due dates and times for our course, type:
handin –l cs221
The first pair of dates and times is the actual deadline; the second pair is the last date and time after
which late assignments will no longer be accepted.
